WindowCling^™

Easy-To-Use Window Control Filters

Recursos

Dónde comprar

Controlling window brightness is easy with Rosco WindowCling filters. Available in three different neutral densities – and in a unique Day For Night Layer – these ultra-thin filters quickly attach to windowpanes using static electricity to attenuate the amount of windowlight in a scene. Rosco WindowCling filters are also designed to stack on top of each other in order to achieve the needed brightness level as lighting conditions change outside.

Easy To Apply

Rosco WindowCling is available in 60” x 25’ (1.52 x 7.62M) rolls and it uses the power of static electricity to adhere to windowpanes. No more need for soapy water or flat, syrupy clear soda products that attract ants. You don’t even need to pre-cut to size before installation. Just clean & buff the windows – position the WindowCling onto the pane – and then use a matte knife to cut the WindowCling to size. Because the thin WindowCling films are so lightweight, they will cling to windows for days and weeks if left undisturbed. And, because there isn’t any sort of adhesive, the WindowCling filters can be removed just as easily and re-rolled for future use on your next project.

Stackable Window Control

Oftentimes, the brightness level of windowlight changes throughout the day, so filmmakers need a window control solution that they can use to adjust on the fly. In the past, stacking NDs has proven difficult because unwanted color shifts can happen as you add layers of ND. Rosco WindowCling filters have been engineered to cling and layer on top of each other – up to eight stops! This enables filmmakers to quickly and easily adjust their windowlight as the brightness levels change throughout the day.

A Unique "Day For Night" Layer

WindowCling is available in three standard Neutral Densities – N.3, N.6 & N.9 – but it’s also available in D/N rolls that enable filmmakers to darken the windows to make it look like it’s night outside. This unique “Day For Night” layer not only lowers the overall light level of the window by four stops – it also adds a tint of steel blue to mimic the coloration of moonlight. The next time you need to transform daylight to moonlight for a Day For Night shoot - simply install the WindowCling D/N Layer onto the window, then stack the appropriate WindowCling ND on top to achieve the desired windowlight level needed for the scene.

Roll Dimensions:	60" x 25' (1.52 x 7.62M) on a 2” (5.1cm) core
Weight:	2.46 lbs. (1.12 kg)
Material Thickness:	1.4 mil (36 µm)

#8601 WindowCling D/N Layer	An optically clear “Day For Night” layer that reduces the incident light level of windowlight by 2.5 stops while also adding a steel blue tint to mimic moonlight. T% = 18%
#8603 WindowCling ND3	An optically clear N.3 neutral density filter that reduces the incident light level of windowlight by one stop. T% = 49%
#8606 WindowCling ND6	An optically clear N.6 neutral density filter that reduces the incident light level of windowlight by two stops. T% = 28%
#8609 WindowCling ND9	An optically clear N.9 neutral density filter that reduces the incident light level of windowlight by three stops. T% = 15%

Rosco WindowCling filters can be stacked on top of each other to further reduce the incident light level of a window – up to a maximum of eight stops before any noticeable color shift begins to occur.

Product Numbers

101086016025 – #8601 WindowCling D/N Layer - 60" x 25' (1.52 x 7.62M) Roll

101086036025 – #8603 WindowCling ND3 - 60" x 25' (1.52 x 7.62M) Roll

101086066025 – #8606 WindowCling ND6 - 60" x 25' (1.52 x 7.62M) Roll

101086096025 – #8609 WindowCling ND9 - 60" x 25' (1.52 x 7.62M) Roll